Honeycomb paperboard began to heat up in 1998 and reached its climax in the first half of last year. Now it has cooled. What are the future development trends and how should the road go? Many companies and investors have come to ask this question.
The development trend of honeycomb paperboard, in short, wave advance. The reasons for hot and cold are the same. It is not possible to rise straight, nor is it possible to go straight down. It is believed that the development of honeycomb paperboard will come soon, and it will heat up very quickly. The end of the life of wood packaging has come. This view is overly optimistic and there is a big gap from reality. It is considered that honeycomb paperboard has no future and it is impossible to replace wood packaging. This view is too pessimistic and does not go deep into the production of honeycomb paperboard. The two views are diametrically opposed and each has its own reasons.
Heat due: First, the market demand. From September 1998, the United States first launched a shipment of wood packaging for China, followed by Canada and Britain, which hindered the municipal barrier to the export of goods in China. Last year, the European Union announced the European Commission’s resolution on June 1st, requesting the EU15 to implement emergency measures to prevent the spread of Anoplophora tincture in the wood packaging of China (excluding Hong Kong Special Administrative Region) products. The emergency measures implement new quarantine standards for all wood packaging of goods from China (excluding the Hong Kong Special Administrative Region). The emergency measures apply to all wooden packaging that leaves China after June 10, 1999. It is no exception that China’s foreign trade exports have worsened. This is the direct cause of the heat of the honeycomb paperboard. Second, product policies. The country has restricted the deforestation and it has become a national product policy. We drafted the "Guided Catalogue for Packaging of Exported Goods," and honeycombed paperboard became the preferred material for substitute wood. Third, the price is moving. The general trend of wood prices will not change. Packaging with wood is no longer a low cost, and switching to other more economical materials is inevitable. Honeycomb's cardboard structure is scientific and rational, and it conforms to the trend of conservation of resources and has been connoisseurs.
Cold due to: First, the equipment elbow. There are only a few manufacturers of honeycomb paperboard production equipment in China. There are not many products that can really bring equipment to the market. There is less choice for users. No matter whether the quantity or quality of equipment is a bottleneck restricting the development of honeycomb paperboard products. There is no competition in equipment manufacturing, equipment quality is difficult to improve, there is no high-quality equipment manufacturing, and the large-scale development of honeycomb paperboard products is unrealistic. Second, the market is vague. The potential market for honeycomb paperboard is very large. The ready market is small. The use of honeycomb paperboard for packaging is still in its infancy. The product has not yet been produced in large quantities. How can the market be widespread? The market needs companies to develop, invest and build, and rely on natural markets. Third, risk pressure. There are countless risks in investing in honeycomb paperboard, and it is doubtful whether it will become a product in the future. Power and resistance are in the same phase. This is the phase of stagnation in the development of China's honeycomb paperboard. It will not be too long. The general trend is that the momentum is greater than the resistance. The development of honeycomb paperboard products will undoubtedly move forward. The current stalemate is not fixed, but it is only slow.
How to promote the development of honeycomb paperboard products? First, the correct understanding of the development of honeycomb paperboard products. Any product has a flourishing, development process, and so does honeycomb cardboard. Starting a difficult and taking the first step does not mean that you can walk normally. You have to repeat it many times to stand still. People expect that honeycomb paperboard will develop faster and there is a gap between expectations and reality. These natural problems that arise in the development process are natural, but they cannot be convinced of the development direction of honeycomb paperboard products. Second, vigorously support the development of honeycomb paperboard products. Whether the honeycomb paperboard products can develop healthily. Relationship equipment manufacturers, product manufacturers, product users, the interests of all aspects, can be described as a loss and loss, a glory and all Rong. From a standpoint of their own, different perspectives and different attitudes toward handling affairs are natural, but they must not be contrary to the principle. All words and deeds must be conducive to the development of honeycomb paperboard products. They must work together to help each other and help each other in the same boat. Third, seriously solve the problems arising from the development of honeycomb paperboard. The development of honeycomb paperboard products will not be easy and will encounter many specific problems. Equipment quality, production technology, material selection, ancillary equipment, product development, production management, market development, product sales, and the resolution of each specific issue will hinder the healthy development of honeycomb paperboard products. Resolving these issues requires the cooperation and support of relevant units, complementing each other. .
Honeycomb paperboard has just emerged in the packaging industry and is a new investment hotspot. There are many in the industry and even foreign companies, and some large companies are also eager to try. From the standpoint of developing the packaging industry, investment is welcome, and there is no more investment in honeycomb paperboard products. Most of the investments are now for small and medium-sized enterprises and private enterprises. A few big companies have started to move and consult and demonstrate. After joining the WTO, foreign companies will patronize the packaging market and competition will intensify. Domestic companies must see this move. Honeycomb paperboard began to heat up in 1998 and reached its climax in the first half of last year. Now it has cooled. What are the future development trends and how should the road go? Many companies and investors have come to ask this question.
The development trend of honeycomb paperboard, in short, wave advance. The reasons for hot and cold are the same. It is not possible to rise straight, nor is it possible to go straight down. It is believed that the development of honeycomb paperboard will come soon, and it will heat up very quickly. The end of the life of wood packaging has come. This view is overly optimistic and there is a big gap from reality. It is considered that honeycomb paperboard has no future and it is impossible to replace wood packaging. This view is too pessimistic and does not go deep into the production of honeycomb paperboard. The two views are diametrically opposed and each has its own reasons.
Heat due: First, the market demand. From September 1998, the United States first launched a shipment of wood packaging for China, followed by Canada and Britain, which hindered the municipal barrier to the export of goods in China. Last year, the European Union announced the European Commission’s resolution on June 1st, requesting the EU15 to implement emergency measures to prevent the spread of Anoplophora tincture in the wood packaging of China (excluding Hong Kong Special Administrative Region) products. The emergency measures implement new quarantine standards for all wood packaging of goods from China (excluding the Hong Kong Special Administrative Region). The emergency measures apply to all wooden packaging that leaves China after June 10, 1999. It is no exception that China’s foreign trade exports have worsened. This is the direct cause of the heat of the honeycomb paperboard. Second, product policies. The country has restricted the deforestation and it has become a national product policy. We drafted the "Guided Catalogue for Packaging of Exported Goods," and honeycombed paperboard became the preferred material for substitute wood. Third, the price is moving. The general trend of wood prices will not change. Packaging with wood is no longer a low cost, and switching to other more economical materials is inevitable. Honeycomb's cardboard structure is scientific and rational, and it conforms to the trend of conservation of resources and has been connoisseurs.
Cold due to: First, the equipment elbow. There are only a few manufacturers of honeycomb paperboard production equipment in China. There are not many products that can really bring equipment to the market. There is less choice for users. No matter whether the quantity or quality of equipment is a bottleneck restricting the development of honeycomb paperboard products. There is no competition in equipment manufacturing, equipment quality is difficult to improve, there is no high-quality equipment manufacturing, and the large-scale development of honeycomb paperboard products is unrealistic. Second, the market is vague. The potential market for honeycomb paperboard is very large. The ready market is small. The use of honeycomb paperboard for packaging is still in its infancy. The product has not yet been produced in large quantities. How can the market be widespread? The market needs companies to develop, invest and build, and rely on natural markets. Third, risk pressure. There are countless risks in investing in honeycomb paperboard, and it is doubtful whether it will become a product in the future. Power and resistance are in the same phase. This is the phase of stagnation in the development of China's honeycomb paperboard. It will not be too long. The general trend is that the momentum is greater than the resistance. The development of honeycomb paperboard products will undoubtedly move forward. The current stalemate is not fixed, but it is only slow.
How to promote the development of honeycomb paperboard products? First, the correct understanding of the development of honeycomb paperboard products. Any product has a flourishing, development process, and so does honeycomb cardboard. Starting a difficult and taking the first step does not mean that you can walk normally. You have to repeat it many times to stand still. People expect that honeycomb paperboard will develop faster and there is a gap between expectations and reality. These natural problems that arise in the development process are natural, but they cannot be convinced of the development direction of honeycomb paperboard products. Second, vigorously support the development of honeycomb paperboard products. Whether the honeycomb paperboard products can develop healthily. Relationship equipment manufacturers, product manufacturers, product users, the interests of all aspects, can be described as a loss and loss, a glory and all Rong. From a standpoint of their own, different perspectives and different attitudes toward handling affairs are natural, but they must not be contrary to the principle. All words and deeds must be conducive to the development of honeycomb paperboard products. They must work together to help each other and help each other in the same boat. Third, seriously solve the problems arising from the development of honeycomb paperboard. The development of honeycomb paperboard products will not be easy and will encounter many specific problems. Equipment quality, production technology, material selection, ancillary equipment, product development, production management, market development, product sales, and the resolution of each specific issue will hinder the healthy development of honeycomb paperboard products. Resolving these issues requires the cooperation and support of relevant units, complementing each other. .
Honeycomb paperboard has just emerged in the packaging industry and is a new investment hotspot. There are many in the industry and even foreign companies, and some large companies are also eager to try. From the standpoint of developing the packaging industry, investment is welcome, and there is no more investment in honeycomb paperboard products. Most of the investments are now for small and medium-sized enterprises and private enterprises. A few big companies have started to move and consult and demonstrate. After joining the WTO, foreign companies will patronize the packaging market and competition will intensify. Domestic companies must see this move.
Wen Miaozhen Deputy Director of National Agency for Reform
The development trend of honeycomb paperboard, in short, wave advance. The reasons for hot and cold are the same. It is not possible to rise straight, nor is it possible to go straight down. It is believed that the development of honeycomb paperboard will come soon, and it will heat up very quickly. The end of the life of wood packaging has come. This view is overly optimistic and there is a big gap from reality. It is considered that honeycomb paperboard has no future and it is impossible to replace wood packaging. This view is too pessimistic and does not go deep into the production of honeycomb paperboard. The two views are diametrically opposed and each has its own reasons.
Heat due: First, the market demand. From September 1998, the United States first launched a shipment of wood packaging for China, followed by Canada and Britain, which hindered the municipal barrier to the export of goods in China. Last year, the European Union announced the European Commission’s resolution on June 1st, requesting the EU15 to implement emergency measures to prevent the spread of Anoplophora tincture in the wood packaging of China (excluding Hong Kong Special Administrative Region) products. The emergency measures implement new quarantine standards for all wood packaging of goods from China (excluding the Hong Kong Special Administrative Region). The emergency measures apply to all wooden packaging that leaves China after June 10, 1999. It is no exception that China’s foreign trade exports have worsened. This is the direct cause of the heat of the honeycomb paperboard. Second, product policies. The country has restricted the deforestation and it has become a national product policy. We drafted the "Guided Catalogue for Packaging of Exported Goods," and honeycombed paperboard became the preferred material for substitute wood. Third, the price is moving. The general trend of wood prices will not change. Packaging with wood is no longer a low cost, and switching to other more economical materials is inevitable. Honeycomb's cardboard structure is scientific and rational, and it conforms to the trend of conservation of resources and has been connoisseurs.
Cold due to: First, the equipment elbow. There are only a few manufacturers of honeycomb paperboard production equipment in China. There are not many products that can really bring equipment to the market. There is less choice for users. No matter whether the quantity or quality of equipment is a bottleneck restricting the development of honeycomb paperboard products. There is no competition in equipment manufacturing, equipment quality is difficult to improve, there is no high-quality equipment manufacturing, and the large-scale development of honeycomb paperboard products is unrealistic. Second, the market is vague. The potential market for honeycomb paperboard is very large. The ready market is small. The use of honeycomb paperboard for packaging is still in its infancy. The product has not yet been produced in large quantities. How can the market be widespread? The market needs companies to develop, invest and build, and rely on natural markets. Third, risk pressure. There are countless risks in investing in honeycomb paperboard, and it is doubtful whether it will become a product in the future. Power and resistance are in the same phase. This is the phase of stagnation in the development of China's honeycomb paperboard. It will not be too long. The general trend is that the momentum is greater than the resistance. The development of honeycomb paperboard products will undoubtedly move forward. The current stalemate is not fixed, but it is only slow.
How to promote the development of honeycomb paperboard products? First, the correct understanding of the development of honeycomb paperboard products. Any product has a flourishing, development process, and so does honeycomb cardboard. Starting a difficult and taking the first step does not mean that you can walk normally. You have to repeat it many times to stand still. People expect that honeycomb paperboard will develop faster and there is a gap between expectations and reality. These natural problems that arise in the development process are natural, but they cannot be convinced of the development direction of honeycomb paperboard products. Second, vigorously support the development of honeycomb paperboard products. Whether the honeycomb paperboard products can develop healthily. Relationship equipment manufacturers, product manufacturers, product users, the interests of all aspects, can be described as a loss and loss, a glory and all Rong. From a standpoint of their own, different perspectives and different attitudes toward handling affairs are natural, but they must not be contrary to the principle. All words and deeds must be conducive to the development of honeycomb paperboard products. They must work together to help each other and help each other in the same boat. Third, seriously solve the problems arising from the development of honeycomb paperboard. The development of honeycomb paperboard products will not be easy and will encounter many specific problems. Equipment quality, production technology, material selection, ancillary equipment, product development, production management, market development, product sales, and the resolution of each specific issue will hinder the healthy development of honeycomb paperboard products. Resolving these issues requires the cooperation and support of relevant units, complementing each other. .
Honeycomb paperboard has just emerged in the packaging industry and is a new investment hotspot. There are many in the industry and even foreign companies, and some large companies are also eager to try. From the standpoint of developing the packaging industry, investment is welcome, and there is no more investment in honeycomb paperboard products. Most of the investments are now for small and medium-sized enterprises and private enterprises. A few big companies have started to move and consult and demonstrate. After joining the WTO, foreign companies will patronize the packaging market and competition will intensify. Domestic companies must see this move. Honeycomb paperboard began to heat up in 1998 and reached its climax in the first half of last year. Now it has cooled. What are the future development trends and how should the road go? Many companies and investors have come to ask this question.
The development trend of honeycomb paperboard, in short, wave advance. The reasons for hot and cold are the same. It is not possible to rise straight, nor is it possible to go straight down. It is believed that the development of honeycomb paperboard will come soon, and it will heat up very quickly. The end of the life of wood packaging has come. This view is overly optimistic and there is a big gap from reality. It is considered that honeycomb paperboard has no future and it is impossible to replace wood packaging. This view is too pessimistic and does not go deep into the production of honeycomb paperboard. The two views are diametrically opposed and each has its own reasons.
Heat due: First, the market demand. From September 1998, the United States first launched a shipment of wood packaging for China, followed by Canada and Britain, which hindered the municipal barrier to the export of goods in China. Last year, the European Union announced the European Commission’s resolution on June 1st, requesting the EU15 to implement emergency measures to prevent the spread of Anoplophora tincture in the wood packaging of China (excluding Hong Kong Special Administrative Region) products. The emergency measures implement new quarantine standards for all wood packaging of goods from China (excluding the Hong Kong Special Administrative Region). The emergency measures apply to all wooden packaging that leaves China after June 10, 1999. It is no exception that China’s foreign trade exports have worsened. This is the direct cause of the heat of the honeycomb paperboard. Second, product policies. The country has restricted the deforestation and it has become a national product policy. We drafted the "Guided Catalogue for Packaging of Exported Goods," and honeycombed paperboard became the preferred material for substitute wood. Third, the price is moving. The general trend of wood prices will not change. Packaging with wood is no longer a low cost, and switching to other more economical materials is inevitable. Honeycomb's cardboard structure is scientific and rational, and it conforms to the trend of conservation of resources and has been connoisseurs.
Cold due to: First, the equipment elbow. There are only a few manufacturers of honeycomb paperboard production equipment in China. There are not many products that can really bring equipment to the market. There is less choice for users. No matter whether the quantity or quality of equipment is a bottleneck restricting the development of honeycomb paperboard products. There is no competition in equipment manufacturing, equipment quality is difficult to improve, there is no high-quality equipment manufacturing, and the large-scale development of honeycomb paperboard products is unrealistic. Second, the market is vague. The potential market for honeycomb paperboard is very large. The ready market is small. The use of honeycomb paperboard for packaging is still in its infancy. The product has not yet been produced in large quantities. How can the market be widespread? The market needs companies to develop, invest and build, and rely on natural markets. Third, risk pressure. There are countless risks in investing in honeycomb paperboard, and it is doubtful whether it will become a product in the future. Power and resistance are in the same phase. This is the phase of stagnation in the development of China's honeycomb paperboard. It will not be too long. The general trend is that the momentum is greater than the resistance. The development of honeycomb paperboard products will undoubtedly move forward. The current stalemate is not fixed, but it is only slow.
How to promote the development of honeycomb paperboard products? First, the correct understanding of the development of honeycomb paperboard products. Any product has a flourishing, development process, and so does honeycomb cardboard. Starting a difficult and taking the first step does not mean that you can walk normally. You have to repeat it many times to stand still. People expect that honeycomb paperboard will develop faster and there is a gap between expectations and reality. These natural problems that arise in the development process are natural, but they cannot be convinced of the development direction of honeycomb paperboard products. Second, vigorously support the development of honeycomb paperboard products. Whether the honeycomb paperboard products can develop healthily. Relationship equipment manufacturers, product manufacturers, product users, the interests of all aspects, can be described as a loss and loss, a glory and all Rong. From a standpoint of their own, different perspectives and different attitudes toward handling affairs are natural, but they must not be contrary to the principle. All words and deeds must be conducive to the development of honeycomb paperboard products. They must work together to help each other and help each other in the same boat. Third, seriously solve the problems arising from the development of honeycomb paperboard. The development of honeycomb paperboard products will not be easy and will encounter many specific problems. Equipment quality, production technology, material selection, ancillary equipment, product development, production management, market development, product sales, and the resolution of each specific issue will hinder the healthy development of honeycomb paperboard products. Resolving these issues requires the cooperation and support of relevant units, complementing each other. .
Honeycomb paperboard has just emerged in the packaging industry and is a new investment hotspot. There are many in the industry and even foreign companies, and some large companies are also eager to try. From the standpoint of developing the packaging industry, investment is welcome, and there is no more investment in honeycomb paperboard products. Most of the investments are now for small and medium-sized enterprises and private enterprises. A few big companies have started to move and consult and demonstrate. After joining the WTO, foreign companies will patronize the packaging market and competition will intensify. Domestic companies must see this move.
Wen Miaozhen Deputy Director of National Agency for Reform
The fusion of traditional technology and modern aesthetics behind each product is a deep exploration of the material and structure. With "steel" as the medium, the pure manual process journey is opened to convey the Fireplace culture and design ideas to the whole world.From the profound interpretation of contemporary industrial design, strict selection of each raw material, strict control of each process, so that made in China gives new meaning to the fireplace with traditional handwork and modern aesthetics, paying tribute to consumers.Select strong, fire-resistant high carbon steel surface imported heat - resistant paint. Skillfully use modern technology and traditional manual combination to provide high quality products.The use of high carbon steel, molten metal, heat-resistant paint and the minimalist design in line with the current international trend make it a timeless work of art. Made in China makes Mevera fireplace more trusted by people.
| Name | Hanging steel brazier firepit |
| Material | Corten steel |
| Cooking plate Size | Diameter 800mm |
| Weight | 65KG |
| Packing | wooden box packing |
Packing
Packing will by wooden box.
Ethanol Fire Pit,Bio Ethanol Fire Pit,Alcohol Fire Pit,Biofuel Fire Pit
Henan Jinbailai Industrial Co.,Ltd , https://www.jblfirepits.com