The constant temperature and humidity test chamber mainly conducts environmental simulation tests on the physical and other relevant characteristics of the product under high temperature and high humidity, low temperature and low humidity conditions in accordance with national standards. Requirements for product design, improvement, identification and factory inspection.
High-quality constant temperature and humidity test chambers are expensive, ranging from more than 20,000 to more than 100,000. So, is there any way to save costs for buying equipment?
We can't prevent the maintenance of the constant temperature and humidity test box through some small skills in daily life to lengthen its service life, which is also a labor-saving way to save costs. Let's learn to extend the constant temperature and humidity test together. Several tips for the service life of the box:
The working environment of the constant temperature and humidity test chamber has a direct impact on its working efficiency.
1. Ambient temperature: 15 degrees-35 degrees, can not be tested outside this environment, so as not to accelerate the aging of the internal system of the constant temperature and humidity test chamber;
2. Surrounding environment: no strong vibration;
3. No direct sunlight or other heat sources direct radiation, moisture and moisture;
4. There is no high concentration of dust and corrosive substances around;
5. Part of the space should be left between the equipment and the wall;
6. There must be a certain space between the tested items in the box, the inner wall of the box and the tested items;
7. Keep the machine clean before and after use;
8. Regular maintenance according to the instructions, especially the maintenance of the condenser, is related to the service life of the compressor.
9. Water tanks, water pipes, etc. should be regularly maintained (maintenance and maintenance are performed according to the instructions);
It is particularly reminded that the ambient operating temperature is particularly important for its working efficiency. The refrigeration process of the constant temperature and humidity test chamber should be a heat absorption process professionally. If the ambient temperature is too high, it will undoubtedly increase the working load of the compressor and greatly reduce Its work efficiency.
The above is the main method to prolong the life of the constant temperature and humidity test chamber. In the previous section, we also analyzed how to control the internal temperature and humidity of the constant temperature and humidity test chamber.
Spulance Cotton Roll,Surgical Spulance Cotton Roll,Consumables Spulance Cotton Roll,Spulance Cotton Roll For Medical
COTTONWHISPER (TAIZHOU) DAILY PRODUCTS CO.,LTD , https://www.cottonwhipershop.com