Teach you several ways to choose solid wood flooring

In the summer, due to the air is too dry or too humid, the extreme weather phenomenon has not always been considered a good season for home improvement. Many people think that spring and autumn are the golden season of decoration. In fact, in the summer decoration, as long as the problems should be handled well, according to the normal construction process and construction process, each work can also be done to satisfy you. engineering. Life Home Xiaobian for you to integrate all kinds of summer home improvement information, so that you can easily put out a comfortable love nest.

When consumers buy solid wood flooring, they are often dizzy by a variety of types and different prices. They are often pick and choose, but they don’t know which products to take home. The focus of the Shenyang home network business streaking bananas tell everyone, in fact, just pick a few points to pay attention to the floor, you can let you worry about buying the right floor.

First, the tree material wood floor

There are many kinds of trees, precious rosewood, teak; general maple, eucalyptus, ash, and gamut; cheap pine, pine, etc., the price difference is very large. Nowadays, there are many misleading trees in the market. Consumers must choose their favorite tree species, texture, color, choose the color palette as much as possible, and try to select stable tree species to avoid scooping and twisting during long-term use of wood flooring. , bends, cracks, arches, rings, etc.

Second, choose the size

At present, the solid wood flooring supplied on the market has a long and wide specification, such as 910mm*125mm*18mm. In fact, the wooden floor should be short and not long, and the smaller the size, the stronger the deformation resistance.

Third, choose moisture content

The moisture content of the wood floor is very important, and the moisture content of the purchased floor must be consistent with the local equilibrium moisture content. The method for determining the equilibrium moisture content is very simple. Firstly, the moisture content of the purchased varieties is measured in the exhibition hall, and then the moisture content of the wood flooring of the purchased varieties is checked out of the box. If the moisture content of the two is only 1%-2%, it is a qualified product.

Fourth, the selection of processing accuracy

Use 10 pieces of floor to assemble on the flat floor, and check whether the processing quality accuracy, smoothness, smoothness, squatting, groove matching, installation gap, etc. are tightly assembled by hand touch and eye view.

Fifth, select the quality of the substrate

Check the floor for any wood defects such as insect eyes, cracking, decay, blueing, and dead knots. For small joints, the color difference can not be too demanding, this is the natural property of wood. As for the natural texture of wood, the vast majority are string cutting surfaces, and a small part is the diameter cutting surface. If the same cutting surface is required, it is difficult to achieve in solid wood flooring, unless it is a veneer veneer.

Sixth, choose paint quality

Whether it is lacquer, roller paint floor, commonly known as lacquered board; whether it is bright or matt lacquered floor, it should be observed whether the paint on the surface of the lacquer plate is uniform, full, smooth and leak-free, blistering, perforation, among them It is recommended to apply the UV-curing coating. The market distributors refer to the UV lacquer board. The wear resistance and scalding resistance are superior to other finishing processes. There is also a very good new technology called water-based lacquer, but the price is higher, only a few large manufacturers have.

Seven, the key is laying

The laying of the floor must be carried out according to the scientific process. Whoever buys the floor should ask for the shop, and try to be on site to avoid the floor quality and construction quality, and cause economic losses and mental burden to the consumers. If the consumer has to ask someone to lay it, it is important to check the quantity and quality of the floor before laying. Once laid, it has nothing to do with the quality of the floor, and there is no warranty.

Mastered the high-tech purchases, carefully discerning when buying, although it can reduce the possibility of being fooled. However, choosing a reputable merchant and retaining the proof of purchase is the best means of safeguarding rights.

Wireless Daylight Lamp

Light Therapy Lamp

Guangdong Jishengke Industrial Co.,Ltd , https://www.jskpads.com