In addition to green shopping, green consumption also requires consumers to develop consumption habits that are conducive to the recycling of packaging waste. The environmental protection department shall set up classified bins in parks, streets, and residential quarters to guide people to consciously sort and recycle the packaging wastes. Promote and support the community to initiate "green shopping" activities, go out to purchase goods, try to bring their own shopping bags, and reduce the use of "used to throw" packaging products, such as disposable plastic lunch boxes, plastic bags, paper cups, etc., to encourage people to use repeatable Used and recycled packaging containers.
3. Strengthen recycling and reuse, and realize the ecological recycling of packaging waste From the perspective of circular economy, assessing the impact of the input and output of an economic system on the environment must be based on the entire process and the entire system, not just Involving one or the other part. Therefore, Life Cycle Analysis (LCA) is a technical idea for microeconomic analysis of circular economy. It requires the analysis of the system's resource consumption and pollution emissions from the entire process of materials and energy, ie, extraction, processing, transportation, use, recycling, and final disposal, in order to grasp the whole process and the whole system to the ecological environment. Impact, thereby assessing the merits of the system's ecological and economic benefits. If people implement clean production during mining and processing, and implement clean circulation and green consumption during transportation and use, and can not completely avoid the possible environmental pollution caused by packaging waste, then they should be in the recycling cycle and final disposal. In the final stage, as much waste as possible is recovered and used, and residual waste is finally disposed of in an environmentally acceptable manner.
The greatest benefit of recycling and recycling of packaging waste is to save energy and resources, not only to create considerable economic benefits, but also to generate good environmental benefits. Taking the recycling of two aluminum cans as an example, remelting and smelting 1T aluminum saves 95% of energy compared to producing aluminum using bauxite. Recovering 1T aluminum can save 4T aluminum ore, 400kG of petroleum and coke, and steel and glass waste can be saved. 50% of the energy required to produce this type of material; using plastic waste to make parts or packaging containers can save 85% to 90% of the energy needed to produce plastics.
At present, China still pays insufficient attention to the recycling and reuse of packaging waste. The recovery technology is backward, the system is not perfect, and the recycling rate is very low. According to statistics, the recycling rate of waste packaging paper in China is only 30%. The packaging of medicines, cans, and cosmetics is almost completely abandoned, and the plastic recycling rate is only 30%. We should learn from the successful experiences of developed countries and actively carry out the recycling and reuse of packaging waste.
1 Contaminated by the rule of law and forced companies to recycle packaging waste.
German law clearly stipulates that since July 1, 1995, the recycling rate of packaging materials such as glass, tinplate, aluminum, cardboard, and plastic must reach 80%. The goal of the Dutch government is to reduce the national "production" of waste by 70 to 90% within 10 years. France stipulates that manufacturers and importers must complete 70% of the recycling rate of used packaging in 2000. In 2003, 85% of packaging materials should be recycled. The United Kingdom stipulates that in 2000, 60% of industrial product packaging and 35% of household product packaging will be recycled. In order to promote the use of reusable and recycled packaging products, the European Union has stipulated that from 2000 onwards, packaging materials that cannot be reused or recycled cannot be excluded from the market. The "Cleaner Production Promotion Law of the People's Republic of China" stipulates that: Enterprises that produce and sell products and packaging items that have been included in the compulsory recycling catalog must recycle the products and packaging after the products are scrapped and used; Compulsory recycling of products and packaging of catalogues shall be subject to economic measures conducive to recycling; the government's economic and trade administrative department shall regularly inspect the implementation of compulsory recycling of products and packaging, and promptly announce the inspection results to the public; failing to perform the products or packaging In case of recovery, the administrative department of economic and trade administration shall order it to make correction within a time limit; if it refuses to make corrections, it shall be fined not more than 100,000 yuan.
Circular economy policies and regulations warns people: The manufacturers and sellers of packaged products should be responsible for the entire life cycle of the products. They are obliged to recycle the waste generated from their products and bear the necessary expenses; The packaging produced in industrial enterprises and circulation enterprises Waste must not enter municipal waste disposal systems. This means that whoever produces these products must be responsible for recycling the packaging waste of these products; if you can't recycle the packaging waste according to the regulations, you have no right to continue to organize production, which enhances the reduction of packaging for producers and sellers. The awareness of waste has also changed people’s perception of packaging waste and viewed it as a renewable resource that can be used.
2 Use economic levers to promote the recycling and reuse of packaging waste.
The “polluter and who govern†policy that was implemented in the past is a passive environmental pollution control model. After the formation of pollution, it was forced by the environmental supervision department to take countermeasures to carry out low-standard governance. It is often difficult to remove the effects of environmental pollution. The circular economy implements the principles of “who pollutes, who pays,†and “who govern, who benefitsâ€, and polluters pay a huge economic price, making them have to implement cleaner production; so that the polluters get considerable economic benefits, encouraging All sectors of the community invest in the environmental protection industry.
Collect garbage tax. The most direct incentive for circular economy is to charge according to the amount of garbage that is dumped. There are more than 200 cities in the United States that levy garbage taxes. A study showed that if the 32-gallon garbage per bag is taxed at US$1.5, it will reduce urban waste by 18%. Many European countries have adopted waste charging policies, but at the same time they actively encourage the recycling of packaging waste. Special recycling bins are provided in residential areas and public places to facilitate people's input of packaging waste. It is free to put packaging waste into the recycling bin, and it will be charged if it is put into garbage bags.
Collect tax on packaging. Many European countries charge packaging taxes for products that have environmental impacts from packaging waste. This approach raises the cost price of those packaging wastes that require special treatment or are not easily recycled, relatively reduces the price of those products that use the easy-to-recycle packaging, encourages them with market price mechanisms, and forces product producers to design and produce. In the initial stage, it is considered whether the packaging can be easily recycled after use, thereby reducing environmental pollution. A packing deposit is charged, and for some packages that are easy to reuse directly, a packing deposit can be used. The seller delivers the deposit to the producer, and the customer delivers the deposit to the seller, driving recovery in economic interest.
The implementation of eco-packaging is a complex system project. It is necessary to start with the idea of ​​developing a recycling economy and carry out an overall and systematic analysis and treatment of the entire life cycle of product packaging. To implement cleaner production, avoid and reduce the generation of waste from economic sources; promote green consumption and build a favorable market environment for ecological packaging; timely and comprehensively recycle packaging waste, and give as much recycling as possible; and finally, End-of-life waste that does not have re-use value should be treated in a non-hazardous manner so that it can meet the requirements of not polluting the environment.
3. Strengthen recycling and reuse, and realize the ecological recycling of packaging waste From the perspective of circular economy, assessing the impact of the input and output of an economic system on the environment must be based on the entire process and the entire system, not just Involving one or the other part. Therefore, Life Cycle Analysis (LCA) is a technical idea for microeconomic analysis of circular economy. It requires the analysis of the system's resource consumption and pollution emissions from the entire process of materials and energy, ie, extraction, processing, transportation, use, recycling, and final disposal, in order to grasp the whole process and the whole system to the ecological environment. Impact, thereby assessing the merits of the system's ecological and economic benefits. If people implement clean production during mining and processing, and implement clean circulation and green consumption during transportation and use, and can not completely avoid the possible environmental pollution caused by packaging waste, then they should be in the recycling cycle and final disposal. In the final stage, as much waste as possible is recovered and used, and residual waste is finally disposed of in an environmentally acceptable manner.
The greatest benefit of recycling and recycling of packaging waste is to save energy and resources, not only to create considerable economic benefits, but also to generate good environmental benefits. Taking the recycling of two aluminum cans as an example, remelting and smelting 1T aluminum saves 95% of energy compared to producing aluminum using bauxite. Recovering 1T aluminum can save 4T aluminum ore, 400kG of petroleum and coke, and steel and glass waste can be saved. 50% of the energy required to produce this type of material; using plastic waste to make parts or packaging containers can save 85% to 90% of the energy needed to produce plastics.
At present, China still pays insufficient attention to the recycling and reuse of packaging waste. The recovery technology is backward, the system is not perfect, and the recycling rate is very low. According to statistics, the recycling rate of waste packaging paper in China is only 30%. The packaging of medicines, cans, and cosmetics is almost completely abandoned, and the plastic recycling rate is only 30%. We should learn from the successful experiences of developed countries and actively carry out the recycling and reuse of packaging waste.
1 Contaminated by the rule of law and forced companies to recycle packaging waste.
German law clearly stipulates that since July 1, 1995, the recycling rate of packaging materials such as glass, tinplate, aluminum, cardboard, and plastic must reach 80%. The goal of the Dutch government is to reduce the national "production" of waste by 70 to 90% within 10 years. France stipulates that manufacturers and importers must complete 70% of the recycling rate of used packaging in 2000. In 2003, 85% of packaging materials should be recycled. The United Kingdom stipulates that in 2000, 60% of industrial product packaging and 35% of household product packaging will be recycled. In order to promote the use of reusable and recycled packaging products, the European Union has stipulated that from 2000 onwards, packaging materials that cannot be reused or recycled cannot be excluded from the market. The "Cleaner Production Promotion Law of the People's Republic of China" stipulates that: Enterprises that produce and sell products and packaging items that have been included in the compulsory recycling catalog must recycle the products and packaging after the products are scrapped and used; Compulsory recycling of products and packaging of catalogues shall be subject to economic measures conducive to recycling; the government's economic and trade administrative department shall regularly inspect the implementation of compulsory recycling of products and packaging, and promptly announce the inspection results to the public; failing to perform the products or packaging In case of recovery, the administrative department of economic and trade administration shall order it to make correction within a time limit; if it refuses to make corrections, it shall be fined not more than 100,000 yuan.
Circular economy policies and regulations warns people: The manufacturers and sellers of packaged products should be responsible for the entire life cycle of the products. They are obliged to recycle the waste generated from their products and bear the necessary expenses; The packaging produced in industrial enterprises and circulation enterprises Waste must not enter municipal waste disposal systems. This means that whoever produces these products must be responsible for recycling the packaging waste of these products; if you can't recycle the packaging waste according to the regulations, you have no right to continue to organize production, which enhances the reduction of packaging for producers and sellers. The awareness of waste has also changed people’s perception of packaging waste and viewed it as a renewable resource that can be used.
2 Use economic levers to promote the recycling and reuse of packaging waste.
The “polluter and who govern†policy that was implemented in the past is a passive environmental pollution control model. After the formation of pollution, it was forced by the environmental supervision department to take countermeasures to carry out low-standard governance. It is often difficult to remove the effects of environmental pollution. The circular economy implements the principles of “who pollutes, who pays,†and “who govern, who benefitsâ€, and polluters pay a huge economic price, making them have to implement cleaner production; so that the polluters get considerable economic benefits, encouraging All sectors of the community invest in the environmental protection industry.
Collect garbage tax. The most direct incentive for circular economy is to charge according to the amount of garbage that is dumped. There are more than 200 cities in the United States that levy garbage taxes. A study showed that if the 32-gallon garbage per bag is taxed at US$1.5, it will reduce urban waste by 18%. Many European countries have adopted waste charging policies, but at the same time they actively encourage the recycling of packaging waste. Special recycling bins are provided in residential areas and public places to facilitate people's input of packaging waste. It is free to put packaging waste into the recycling bin, and it will be charged if it is put into garbage bags.
Collect tax on packaging. Many European countries charge packaging taxes for products that have environmental impacts from packaging waste. This approach raises the cost price of those packaging wastes that require special treatment or are not easily recycled, relatively reduces the price of those products that use the easy-to-recycle packaging, encourages them with market price mechanisms, and forces product producers to design and produce. In the initial stage, it is considered whether the packaging can be easily recycled after use, thereby reducing environmental pollution. A packing deposit is charged, and for some packages that are easy to reuse directly, a packing deposit can be used. The seller delivers the deposit to the producer, and the customer delivers the deposit to the seller, driving recovery in economic interest.
The implementation of eco-packaging is a complex system project. It is necessary to start with the idea of ​​developing a recycling economy and carry out an overall and systematic analysis and treatment of the entire life cycle of product packaging. To implement cleaner production, avoid and reduce the generation of waste from economic sources; promote green consumption and build a favorable market environment for ecological packaging; timely and comprehensively recycle packaging waste, and give as much recycling as possible; and finally, End-of-life waste that does not have re-use value should be treated in a non-hazardous manner so that it can meet the requirements of not polluting the environment.
Dinning Room Furniture,Furniture Dining ,White Dining Furniture,Modern Furniture
Bosa Furniture Co.,Ltd. , https://www.guangdongbosa.com