Supermarket convenience store cash register As its name suggests, it is a POS cash register for supermarkets or convenience stores. Because the POS cash register was used in China a few years ago, the first test site was the supermarket. Over time, a new name for the cash register. “Supermarket cash register†has appeared, and even nowadays, even in other businesses, some users are used to calling the supermarket cash register.
Xiaobian often receives feedback from many users who use the cash register. Most of them are troubleshooting the problems of the supermarket cash register products, and some users complain that they have been deceived by the suppliers. After further summarization, many of them are Because of the user's improper operation and various failures, the next step is to introduce the common faults in the supermarket cash register.
Failure a money box pops up without power
1. After using for a period of time, lubricating oil may be added due to insufficient lubricating oil and increased friction.
2. The pulse width of the open cash box is not enough (the delay is insufficient).
3. The spring or crank arm that pushes the cash box is not flexible enough.
Faulty second supermarket cash register in the external printer does not go
Inspection Method:
1. Check if the ribbon is correct;
2, check whether the ribbon is the card owner
3. Check if the printer is turned on.
Fault three supermarket cash register printer does not produce paper
Inspection Method:
1. When at work, the cash register printer suddenly does not discharge paper. The first is to check whether there is thermal cash register paper in the printer. If it is not, it can be replaced in time;
2. If there is a cash register paper, we will observe what will appear on the screen of the supermarket cash register software system when we press the work. If there is nothing, it may be a problem with the printer or the cash register circuit link;
3. Check if there is any paper jam in the printer of the supermarket cash register. If it is jammed, stop working immediately, and then repair the inside of the printer. If it is not good, please contact the supplier technical personnel in time to solve the problem. If you can't do it, you can ask the technician to go to the door to repair it;
4. Check if the printer connection is normal. Check if there is any fault inside the printer. (If the above checks are normal, the last one is best to contact the technician for maintenance).
Fault 4 How to deal with the display darkening after using one stage
Inspection Method:
1. Check if the monitor signal line is loose.
2. Make sure that the display power indicator and the host power indicator are normal.
3. Adjust the brightness of the display to make sure the cash register is not in hibernation.
4, replace the display to the factory to repair.
The fault five supermarket cash register machine suddenly disappeared
Inspection Method:
1. Make sure the communication cable is wired correctly and securely. Check that the power settings are correct or the output is normal.
2, run CHECK, test whether the customer is correct, replace the serial port test is correct, determine whether the serial port error.
3. Open the monitor and check if the air vent of the VFD screen is damaged.
Stainless Steel Vacuum Water Bottle
Stainless Steel Bottles are made from high-grade 18/8 stainless steel. This material is food grade, non-toxic, durable and easy to clean.
Our Stainless Steel Bottles are mostly Stainless Steel Vacuum Water Bottles. They have a double-wall vacuum treatment, so they can ensure your drink keeps as it is. And you don't need to worry about getting your hands cold or hot.
Stainless Steel Single Wall Bottle has a single wall. It sacrifices thermal insulation and improves portability. Holding it in your hand all the time will not cause any discomfort.
Stainless Steel Vacuum Water Bottle,Lid Bamboo Vacuum Bottle,Stainless Steel Silk Printing Vacuum Bottle,Stainless Steel Bulb Lid Vacuum Bottle
Ningbo Auland International Co.,Ltd. , https://www.eversportsbottle.com