During the frequent use of the printer, there are often problems that cannot handle the paper, most of which are paper jam, no paper feed, multiple sheets of paper, and random paper feed. How to deal with these failures? Here are some common reasons and solutions for printer jams.
1 printer paper and its solution1. Whether the surface of the printing paper is flat. If there is a paper jam in the printer, first check if the surface of the paper is flat. If the paper is curled or wrinkled, it is best to use a paper with a smooth surface and a clean surface, and ensure that the surface of the paper does not have a glue-like attachment.
2. The paper is too thin or too much. It must be ensured that the quality of the paper exceeds 60 grams, and the paper is too thin, which will make the printer difficult to feed, which may cause the printer to jam. Also, the paper loaded at one time should not be too thick.
3. The pickup roller is worn. The pickup roller is the most wearable part of the printer. When the paper in the paper tray is normal and the paper cannot be taken, the pickup roller is often worn or the spring is loose. There is not enough pressure to feed the paper into the machine. When the paper take-up roller is worn and can not be replaced at one time, the rubber band can be used for emergency treatment. After winding the rubber band, the friction of the crepe paper is increased, and the paper feeding can be restored to normal.
4. Others. If the paper tray is not installed properly, the paper quality is not good (too thin, too thick, damp), etc., it may also cause paper jam or paper failure.
2 reasons for not feeding paper and solutions1. The printing paper is placed too much. First check if the paper is installed in accordance with the standard. For example, if the loading position has exceeded the arrow mark on the left rail of the printer, if it is exceeded, the paper must be reduced.
2, foreign body blockage. Look for any foreign matter inside the printer. For example, if there is a paper jam in the printer, it will cause no paper feed. If there is a foreign object, it must be excluded. When removing it, be sure to turn off the printer power first, then carefully remove the foreign object. If you want to take out the paper, you must pull the paper slowly in the direction of the paper exit. After removing the paper, check whether there is any residual paper and ensure that the paper is also cleaned.
3. The printing paper is damp. If the paper used is stored for too long and the surface is wet, there may be a problem of not feeding paper. At this time, all we have to do is to dry the paper.
4. Is the ink used up? The black or color ink cartridge light flashes or illuminates to indicate that the ink is almost empty. If the ink cartridge is empty, the printer will not be able to feed paper.
3 reasons for entering multiple pages at a time1. The position of the printing paper. Improper placement of the paper will cause multiple sheets to occur. The correct paper height cannot be higher than the arrow mark on the left rail of the paper slot. Secondly, check if the paper specifications meet the requirements: 60-180 Gram paper can meet the requirements, and ultra-thin paper of less than 60 grams is easy to appear at the same time.
2. The degree of curl on the surface of the printing paper. Curling also causes the occurrence of multiple sheets of paper at a time. To ensure that the surface of the paper is smooth and smooth, if it is slightly curled, you can find a way to flatten it.
3. The effect of electrostatic induction. Static induction can also cause multiple sheets of paper at a time. The paper must be fanned out before installing the paper to ensure that each sheet can be separated separately, and then the paper is loaded into the guide in the correct way. In the paper slot.
4. Adjust the position of the lever. For printers with paper thickness adjustment, it is important to adjust the position of the lever. The position of the paper thickness adjustment lever is also different when using different paper types. For example, when using a conventional thickness paper, the position of the adjustment lever must be set to "0". Of course, different printers have different adjustment standards for the adjustment lever. It is best to refer to the manual.
4 printer messing around paperWhen you print to a page, you suddenly vacate a piece of paper and then automatically print it down. This is often the reason why the printer has been in use for a long time, and the paper detection switch contacts are in poor contact due to wear and dust, which causes the printer to make a wrong judgment. Disassemble the printer and find the paper detection switch carefully cleaned with alcohol to restore normal operation.
All objects whose temperature is higher than absolute zero are constantly emitting infrared radiation energy into the surrounding space. The size of the infrared radiation energy of an object and its wavelength distribution are closely related to its surface temperature. Therefore, the surface temperature of the object can be accurately measured by measuring the infrared energy radiated by the object itself. This is the principle on which the infrared thermometer operates.
After the outbreak, measuring body temperature has become a convenient and intuitive way to find potentially infected people. Many regions require companies to prepare non-contact temperature measuring instruments when they resume work.
Wall Mounted Thermometers, Automatic Thermal Scanner, Temperature Instruments Infrared Thermometer, Body Digital ThermometerÂ
Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.szzcsecurity.com