DIY Teacher's Day Wrinkled Paper Roses

DIY Teacher's Day Wrinkled Paper Roses
DIY crepe paper roses Teacher's Day flowers
DIY Teacher's Day Wrinkled Paper Roses

Spring Hooks Shackles Cable Clamps

Spring hooks, Shackles, and Cable Clamps are all Connecting Parts. Connecting parts are widely used in industrial, commercial, and household products. Our company has a wide range of parts with complete specifications, high-quality, and reasonable prices, which are trusted widely and welcomed by customers. Here is a brief display of several typical products.

1. Bolt Snap Hook Square Base

This part is commonly used in mountaineering, rock climbing, diving, sports, pets, home, and other products. One end of the part is a hook. The hook is closed with a spring snap bolt to prevent the things hanging on the hook from falling off. The other end of the part has a square hole, which can be used to attach to other parts. The square base of the part can freely rotate to prevent entanglement. The material of this part can be stainless steel or Zinc alloy with plating. Our company can provide the parts with a length range from 60 mm/ 2.3622" to 107 mm/ 4.4126". Products of other sizes can also be made according to customer requirements. The parts made of stainless steel are stronger and with better anti-rust performance, but the cost is higher. Especially stainless steel 316, its anti-corrosion performance is very good. The cost of Zinc alloy electroplated parts is relatively low. Its appearance is very bright. Zinc alloy electroplated parts are usually used when the strength and anti-rust requirements are not strict.carabiner clip home depot

2. Spring Hook Dual Head

The two ends of this part are round hooks of the same shape. They are both closed with spring bolts, which are very convenient and safe to use. This part is often used in sports, pets, homes, mountaineering, rock climbing, diving, and other products. The parts are usually made of stainless steel. It can also be made of Zinc alloy with plating. The Zinc alloy parts are usually used in low-strength and low-requirement circumstances to save costs. The strength and rust-proof performance of the Zinc alloy parts are not as good as the stainless steel parts. Our company has different sizes of products to choose from. The shortest product length is 65 mm/ 2.5591", and the longest product length is 115 mm/ 4.5276". If customers have other size and shape requirements about the part, we can special make it.

carabiner retractable keychain

3. Wire Clip Cable Clamp Double

The purpose of this part is to connect and fix the metal wire, rope, cable, etc. The part includes an upper cover and a lower cover. The upper cover and the lower cover are assembled with bolts and nuts. When in use, loosen the bolts first, put the wires to be fixed in the middle of the upper and lower cover, then tighten the bolts to tightly press the wire by the upper and lower cover. We can provide parts made of both carbon steel and stainless steel. The length range of the product is from 30 mm/ 1.1811" long to 96 mm/ 3.7795". The part size and shape are customizable, our company can make parts per customer requests.

wire clip

4. D Shackle Stainless Steel

In hoisting, lifting, mountaineering, rock climbing, rigging, diving, sports, and other products, you can often see D Shackle. It is one of the commonly used connectors to connect different parts and prevent separation. The shape of this Shackle is D-shaped, with a detachable cylindrical pin. The pin is with a thread at one end as a closure for the opening. For strength and anti-rust performance considerations, its material is stainless steel. Under normal circumstances, we use stainless steel 304 to manufacture parts. If the product is often used in a humid environment or often in contact with water, it is recommended to use the part made of stainless steel 316 material. The existing opening depth of this part ranges is from 16 mm/ 0.6299" to 118 mm/ 4.6457, and the wire diameter ranges is from 4 mm/ 0.1575" to 38 mm/ 1.4961". If customers need other sizes of parts, our company can also customize them as required.

shackle

5. Bow Shackle Heavy Duty

The shape of Bow Shackle is a bow, with a cylindrical pin at the opening to close it. The end of the pin is threaded and used in conjunction with the nut, which can reliably prevent loosening. The material of this part is stainless steel 304 or 316. Stainless steel 316 has better anti-rust performance and is suitable for use in water-contacting and humid environments. Our parts specifications are complete, the internal depth of the Shackle ranges is from 16 mm/ 0.6299" to 130 mm/ 5.1181", and the internal width ranges is from 12 mm/ 0.4724" to 100 mm/ 3.9370". Other sizes and shapes can be customized according to customer requirements. Bow Shackle is commonly used in rock climbing, rigging, diving, sports hoisting, lifting, and mountaineering products. With excellent quality, reasonable price, and considerate service, our products are welcomed by customers. If you need our products, please feel free to contact us.


shackled





Bolt Snap Hook Square Base, Spring Hook Dual Head, Wire Clip Cable Clamp Double, D Shackle Stainless Steel, Bow Shackle Heavy Duty

YRX Technology (Shenzhen) Co., Ltd. , https://www.yrx-tech.com