[ Chinese wardrobe net ] decoration, the most traditional construction is to design the wall, floor and other parts of the room according to the predetermined style, and then match the furniture and accessories according to its style. But in this way, furniture will be difficult to choose. However, the new model of decoration currently advocated - "customizing in furniture after decoration", has solved this problem well.
1 For the decoration of most houses, modular, integrated and integrated decoration trends are adopted. The whole wardrobe , the overall study room, the wine cabinet, the shoe cabinet, the locker, the entrance cabinet and even the TV cabinet are all tailor-made, so Be prepared for the rain.
2 The whole wardrobe is a large piece of furniture, and its placement directly affects the overall layout of the bedroom.
The structure of the 3 bedroom largely determines the width of the overall wardrobe and the design of the internal space structure of the cabinet. In order to make the actual hanging space of the cabinet enough, it is necessary to change the room layout during the decoration design. After all, everyone has A lot of clothes, even the need to consider storage (quilts, etc.).
4 The size of the custom-made wardrobe will affect the positioning and size of other household items such as beds, bedside tables and dressing tables.
5 Based on the principle of the overall style of the bedroom and the main melody color, the color of the cabinet of the whole wardrobe, the style of the wardrobe sliding door, the color of the door panel and the floor to be selected, the bed frame, the bed cover (single), the curtain, etc. should be selected in advance. Coordination of the color and style of the product.
6 If you need a ceiling, consider also a reasonable overall wardrobe height.
7 Design a reasonable overall wardrobe location, but also consider the reasonable wiring of electricity and network (some need to design the TV stand in the closet), the location of the switch socket, the hanging position of the air conditioner, the size of the passage in the bedroom, and so on.
Most of the buildings are frame-structured, so the position of the wardrobe in the bedroom will inevitably encounter special obstacles such as beams and pillars. How to plan for the rain?
1 Sliding door design to the ceiling of the ceiling, the side of the front side of the beam, should be sealed by the same size as the beam, from the bottom of the beam to the floor to ensure that the sliding door can be completely closed when closed.
2 According to the shape of the beam and the column, the pillar plate and the cladding beam plate can be designed to hide the beam and the pillar, and not to be exposed, so that the wardrobe forms a joint body, and the space is rationally utilized. The 18mm thick plate is required for the column and the cladding beam to ensure that the assembled overall wardrobe is firm.
3 If there are objective beams and columns, the overall wardrobe design should also consider the left and right wide side panels of the light should be open L-shaped integral panels.
4 If the overall wardrobe is designed such that the top cabinet is a wooden board that is flattened and the lower cabinet is a sliding door, the side of the front side of the beam should pass through the same size as the beam, from the bottom of the beam to the top of the lower cabinet. Seal it.
5 If the cabinet may touch the switch socket, cable TV, broadband outlet, etc., the overall wardrobe service provider should be evaluated and measured at the progress of the water and electricity wiring to ensure that they can be used reasonably in the future.
6 With a pillar position, the façade space can be designed as a laminate for stacking small items or a dedicated place for shoes, hats, ties, etc.
The electric patient lift realizes the safe transfer of paralyzed or injured patients or the elderly between beds, wheelchairs, seats, and toilets, which greatly reduces the work intensity of nursing staff, improves nursing efficiency, and reduces nursing risks. It can solve the movement, weighing and positioning control of the DPS patient's body position for the elderly, the disabled, the paralyzed patients, and the bedridden patients.
Features of medical Transfer Patient Lift
The caster legs can be adjusted arbitrarily within the range of 0°-38°, which is suitable for the angular needs of various wheelchairs, seats, toilets and hospital beds.
The height between the pillar and the lifting rod of the electric lift can be adjusted as needed (adjustment distance 0mm-50mm-100mm), and it can be lifted from the ground to a suitable position.
The electric lift has a safety emergency stop device.
During the lifting process, the patient can rotate 360° arbitrarily in order to obtain the best posture during transfer.
The push handle of the electric lift conforms to the principle of dynamics, which is convenient for pushing forward and backward or moving and rotating sideways.
The rear wheel is equipped with a brake device to prevent the lift from sliding when the patient is lifted, causing unreasonable injury to the nursing staff or the patient.
Electric Patient Lift,Patient Lift Hoist,Electric Mobile Patient Lift,Electric Sit To Stand Lift
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalsupplier.com