3) In the use of inks, taking into account the environmental protection, solvent-based inks will gradually be replaced by water-based inks, and UV inks will also be widely used. Because UV inks are dried in a solidified form, no harmful gases are generated, and they are basically free from the environment. Pollution.
4) The processing methods have evolved from simplification to complication and integration, single printing, multiple post-processing to the integration of printing and post-processing, such as printing, hot stamping, glazing, punching, die cutting, etc. The process is completed online.
5) The function of the equipment is being developed from a single type of printing to a combined type of printing. That is, a single machine has functions such as embossing, flexo printing, gravure printing, and screen printing. It can print in multiple ways on one label at the same time.
The label printing industry is yet to be regulated <br> The competition in the label printing industry has become increasingly fierce and has triggered a price war. Price competition is inevitable under the conditions of market economy, but it should be conducted on the basis of fairness and standardization. Due to fierce competition, some small label printers are adopting the low-end approach of high-end products in order to seek higher profits, that is, using low-cost, low-quality, and sub-consumer methods to drive down prices and compete for the market. The result of this will often lead to a deterioration of the vicious circle and disorderly competition, thereby harming the interests of other companies in the industry and affecting the healthy development of the entire industry.
So how should we solve these problems? In order to regulate the development of the industry, a similar industry association organization should be established to coordinate, guide and formulate the specifications of the adhesive label printing industry, such as the quality standards for sticker printing, the company's grade standards, and relatively standard price standards.
In addition, we should also realize that the current phenomenon of "good and bad, unevenness" in the adhesive label printing industry is also the realization that each industry is in line with international standards, and that advanced technologies, processes, and management will be implanted. The inevitable process China has experienced. Therefore, all companies should start from the two aspects of software and hardware to fundamentally solve the problems. The specific methods include: the introduction of new foreign equipment, new processes, new materials, establish a new management concept, establish a new management system, and recruit talents We train talents in all fields to win customers and develop markets with high-quality printing and first-class services. In terms of price positioning, we should determine the price based on the quality and grade of the product, and truly achieve “one penny, one share†to achieve a win-win situation for customers and printing manufacturers.
In order to adapt the transformation of domestic adhesive label printing from low-grade products to high-end products, the company has introduced internationally advanced high-end equipment and has formulated a marketing strategy of “difficulty in selecting new productsâ€.
“New†is what people have never done before. For example, the company has introduced the 12-color Toppan Express high-speed rotary press manufactured by Ko-Pack Co., Ltd., which is a world-class advanced equipment. Currently, it only has three to four domestic machines. One-time printing can be completed in 12 colors. UV ink can be used to coat and die-cut on-line. The maximum speed is up to 100m/min. The most important is that the machine can print the front and back sides of the substrate at one time, and it also has The function of spraying glue and applying silicone oil, folding, and dashed line cutting on the printing machine can produce and process up to 5 to 9 layers of booklet-type printing products, which is often referred to as "Wanli Sticker". Another approach of “new†is to apply multi-component modular printing processes to the production and processing of label printing, to make the label screens novel and exquisite, and to integrate the processes of embossing, screen printing and hot stamping. This is also currently A development direction of the domestic label market.
"Difficulty" is to do products that others find difficult and unwilling to do, such as printing pharmaceutical labels. Because medicines belong to special products, the selection of label printing manufacturers is very strict, and they need to be examined, reviewed, evaluated, etc. The program can finally determine its supplier, and the printing process is more complicated. In addition to the label surface printing, the back of the label must also be printed with a serial number. Normally, this type of label must be printed and processed twice. In addition to strict print quality requirements, it is also required that the serial number not be missing numbers, wrong numbers, or multiple numbers. The control of the label is also very strict. Regardless of the quality of the product, it must be filled in as it is. In addition to normal shipments, the remaining waste labels must be destroyed under the supervision of the customer.
In the atmosphere of market competition, we have realized such a truth that competition is absolute and development is relative. Label printing industry has a lot of room for development, newer and higher development! Therefore, the fierce competition in the label printing industry is normal. Only competition can stimulate people to work. Only a reasonable competition can make this industry more mature.
4) The processing methods have evolved from simplification to complication and integration, single printing, multiple post-processing to the integration of printing and post-processing, such as printing, hot stamping, glazing, punching, die cutting, etc. The process is completed online.
5) The function of the equipment is being developed from a single type of printing to a combined type of printing. That is, a single machine has functions such as embossing, flexo printing, gravure printing, and screen printing. It can print in multiple ways on one label at the same time.
The label printing industry is yet to be regulated <br> The competition in the label printing industry has become increasingly fierce and has triggered a price war. Price competition is inevitable under the conditions of market economy, but it should be conducted on the basis of fairness and standardization. Due to fierce competition, some small label printers are adopting the low-end approach of high-end products in order to seek higher profits, that is, using low-cost, low-quality, and sub-consumer methods to drive down prices and compete for the market. The result of this will often lead to a deterioration of the vicious circle and disorderly competition, thereby harming the interests of other companies in the industry and affecting the healthy development of the entire industry.
So how should we solve these problems? In order to regulate the development of the industry, a similar industry association organization should be established to coordinate, guide and formulate the specifications of the adhesive label printing industry, such as the quality standards for sticker printing, the company's grade standards, and relatively standard price standards.
In addition, we should also realize that the current phenomenon of "good and bad, unevenness" in the adhesive label printing industry is also the realization that each industry is in line with international standards, and that advanced technologies, processes, and management will be implanted. The inevitable process China has experienced. Therefore, all companies should start from the two aspects of software and hardware to fundamentally solve the problems. The specific methods include: the introduction of new foreign equipment, new processes, new materials, establish a new management concept, establish a new management system, and recruit talents We train talents in all fields to win customers and develop markets with high-quality printing and first-class services. In terms of price positioning, we should determine the price based on the quality and grade of the product, and truly achieve “one penny, one share†to achieve a win-win situation for customers and printing manufacturers.
In order to adapt the transformation of domestic adhesive label printing from low-grade products to high-end products, the company has introduced internationally advanced high-end equipment and has formulated a marketing strategy of “difficulty in selecting new productsâ€.
“New†is what people have never done before. For example, the company has introduced the 12-color Toppan Express high-speed rotary press manufactured by Ko-Pack Co., Ltd., which is a world-class advanced equipment. Currently, it only has three to four domestic machines. One-time printing can be completed in 12 colors. UV ink can be used to coat and die-cut on-line. The maximum speed is up to 100m/min. The most important is that the machine can print the front and back sides of the substrate at one time, and it also has The function of spraying glue and applying silicone oil, folding, and dashed line cutting on the printing machine can produce and process up to 5 to 9 layers of booklet-type printing products, which is often referred to as "Wanli Sticker". Another approach of “new†is to apply multi-component modular printing processes to the production and processing of label printing, to make the label screens novel and exquisite, and to integrate the processes of embossing, screen printing and hot stamping. This is also currently A development direction of the domestic label market.
"Difficulty" is to do products that others find difficult and unwilling to do, such as printing pharmaceutical labels. Because medicines belong to special products, the selection of label printing manufacturers is very strict, and they need to be examined, reviewed, evaluated, etc. The program can finally determine its supplier, and the printing process is more complicated. In addition to the label surface printing, the back of the label must also be printed with a serial number. Normally, this type of label must be printed and processed twice. In addition to strict print quality requirements, it is also required that the serial number not be missing numbers, wrong numbers, or multiple numbers. The control of the label is also very strict. Regardless of the quality of the product, it must be filled in as it is. In addition to normal shipments, the remaining waste labels must be destroyed under the supervision of the customer.
In the atmosphere of market competition, we have realized such a truth that competition is absolute and development is relative. Label printing industry has a lot of room for development, newer and higher development! Therefore, the fierce competition in the label printing industry is normal. Only competition can stimulate people to work. Only a reasonable competition can make this industry more mature.
Mobile Stand Up Desk,portable stand up desk,small standing desk,standing desk with wheels,portable adjustable desk,sit stand mobile desk
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplift-system.com