Precision planetary gear reducer gear parts processing and maintenance

Precision planetary gear reducer gear parts need to be processed. First, the precision planetary gear reducer can only be mounted on a flat, shock-absorbing and torsion-resistant support structure. In any case, it is not permissible to hammer the pulley, coupling, pinion or sprocket into the output shaft with a hammer, which can damage the bearing and the shaft.
Precision planetary gear reducer has space-saving, reliable, durable, high overload capacity, power up to 200KW, low energy consumption, superior performance, deceleration efficiency of up to 95c / o more vibration, low noise, rigid cast iron box, gear surface height Frequency heat treatment, after precision machining, constitutes helical gears and bevel gears. Gear reducer is a special reducer for various reactors. Its gears adopt Gleason quasi-spur curve tooth type, and the gears are hard tooth surfaces. It has the characteristics of large bearing capacity, low noise, long life, high efficiency and stable operation. The performance of the whole machine is much better than cycloid reducer and worm gear reducer. It has been widely recognized and applied by users.
The gear module in the precision planetary gear reducer is a very important knowledge point. The higher and the thicker the modular gear teeth, the module is the ratio of the pitch t to the circumference ratio π between the teeth on the same side of the adjacent two teeth. (m=t/π) in millimeters. Modulus is a basic parameter of modular gear teeth. The greater the modulus. If the number of gear teeth is constant, the radial dimension of the wheel is also greater. The modular series standards are based on design, manufacturing and inspection requirements. For gears with non-straight teeth, the modulus has a normal module mn The difference between the end surface module ms and the axial module number mx is based on the respective tooth The ratio of the pitch (normal pitch, end face pitch and axial pitch) to Pi ratio is also in millimeters. The module of the bevel gear has the major end modulus me average modulus mm and the small end modulus m1. For the tool, there is a corresponding tool module mo, etc. The application of the norm module is very wide.