Electronic inks are available in Indigo and Toyo Ink Elcosy. Indigo is capable of printing 8,000 copies of A4 per hour on speed. On the other hand, it can be printed with a light-colored auxiliary dot method, and can be photo-added with a stencil film to achieve photo quality. Roll-up Omnuis trademark printing method, do a variety of changes in content, serial number and color change number anti-counterfeiting features, in the future increase in size (especially wide), if the 28-inch (720mm) can print all-printed chrysanthemum In response to short-term demand, it is still stuck in a high-priced market with slow speed and high cost, which cannot be popularized. The ToyoInk Elcosy print is an electro-magnetic (ink-coagulative adhesion) printing method with a machine width of 600mm and a speed of 350 feet (105 meters) per minute. The cost can be low and the material adaptability is strong. , 6 years have not yet been commercialized.
Inkjet printing is a very mature and practical technology, regardless of thermal foam and piezoelectric methods are not the same, the size of the size from photos to large posters, and even high-speed inkjet production inkjet printing, micro needle point has reached 4800dpi resolution, large The poster also has a resolution of 360 dpi. The inkjet printing using UV drying is excellent in light resistance, weather resistance, and adhesion. It is a big poster, no ink-absorbing surface, heavy slate, steel plate, wooden board, etc. The important printing method of the material.
In the wide range of 1 meter above and below the printing machine, the printing industry has been very popular for proofing work. In the future, there will be a market for poster production and large-scale wedding photo printing. In particular, after the album is printed, the page layout and large-scale printing exhibition will be available. There is still considerable market space. Scitex's high-speed printheads have a very mature market for variable information printing after computerized report printing. The printing press formed a high-speed full-color print, with a width of 22 inches (550mm), a speed of 150 meters per minute, and 360 dpi resolution. The future will certainly be more refined and the speed will increase. In the past decade, the capabilities of inkjet heads have advanced more than a thousand times. The future use of semiconductor process inkjet heads must be larger in size and refined. This is expected.
Using e-paper and electronic ink, which can be repetitively changed in phase, one day can become a book mode. Each time you reload different information without waste paper, the whiteboard in the classroom can be written by different teachers. Its small particle components, due to the induction of different polarities, form a color or an achromatic effect. Once reintegrated into a “white paperâ€, it is of great significance in environmental protection. The printing industry has become a page information provider. By. This type of paper can be used on merchandise, warehouses, and billboards to change prices or content at any time without rewriting.
VIII. Security and anti-counterfeit printing As the printing equipment and technology have been fully improved, the traditional four-color printed trademark, packaging and manual have no anti-counterfeiting effect, and they must be different with six-color and seven-color high-speed fax color printing. In addition, the use of laser holographic stick Standard or gilding, it has some effect, but the magic trail fades, and soon may have to find a more fine interference wave security pattern can be. The high cost of gravure printing also has certain anti-counterfeiting effect. Therefore, the color is thick and the fine carving lines are there. There is a deep layer of anti-counterfeit effect under high-tech. Although the embossing and watermarking techniques are old and effective methods, such as the perforation of stamps, which are punched by millions of yuan per mold, it is not easy to imitate. In short, if the cost does not increase too much and imitation people are not easy to imitate, the most important thing is that without tools, ordinary people can tell with their eyesight that it is the focus of anti-counterfeiting, but out of new technology methods, they will be imitated within a certain period of time. This is the anti-counterfeit focus to be updated from time to time.
IX. Changes in the printing market and changes in the printing industry from the original manufacturing industry to the value-added industries of information dissemination, packaging, and industrial applications. How to deal with the social, market, and value-added chain disruptions, the market is often frustrated, and profits are diminished. Change to nothing, if you stick to the original scope is bound to lose everything. Twenty years ago, the birth rate was less than half of that of the present. The textbook industry was greatly reduced due to children attending school, and the government adopted an open but tightly controlled price effect. The original lucrative market left only a handful of people struggling.
How to find niche-based production projects in the new market, such as design, processing, three-dimensional printing, and variants that cannot be done by others, still has room for development. UV-UV printing on plastic plates has been exported for a year. More than one million US dollars worth of business, similar to LCD-TFT color filter printing, direct lithographic printing of larger thickness corrugated paper, free printing ink interferometric image reproduction, etc., are rare and delicate in the market, so we must find and even develop New technologies are applied in the market. Because the niche market is constantly changing and updating, we must be able to overcome technical difficulties, do a good job of service, and master its own "core skills" to enhance and apply, and more importantly, introduce new equipment and technologies at a critical moment to the market. The first step is to create profitable sustainable development requirements.
Inkjet printing is a very mature and practical technology, regardless of thermal foam and piezoelectric methods are not the same, the size of the size from photos to large posters, and even high-speed inkjet production inkjet printing, micro needle point has reached 4800dpi resolution, large The poster also has a resolution of 360 dpi. The inkjet printing using UV drying is excellent in light resistance, weather resistance, and adhesion. It is a big poster, no ink-absorbing surface, heavy slate, steel plate, wooden board, etc. The important printing method of the material.
In the wide range of 1 meter above and below the printing machine, the printing industry has been very popular for proofing work. In the future, there will be a market for poster production and large-scale wedding photo printing. In particular, after the album is printed, the page layout and large-scale printing exhibition will be available. There is still considerable market space. Scitex's high-speed printheads have a very mature market for variable information printing after computerized report printing. The printing press formed a high-speed full-color print, with a width of 22 inches (550mm), a speed of 150 meters per minute, and 360 dpi resolution. The future will certainly be more refined and the speed will increase. In the past decade, the capabilities of inkjet heads have advanced more than a thousand times. The future use of semiconductor process inkjet heads must be larger in size and refined. This is expected.
Using e-paper and electronic ink, which can be repetitively changed in phase, one day can become a book mode. Each time you reload different information without waste paper, the whiteboard in the classroom can be written by different teachers. Its small particle components, due to the induction of different polarities, form a color or an achromatic effect. Once reintegrated into a “white paperâ€, it is of great significance in environmental protection. The printing industry has become a page information provider. By. This type of paper can be used on merchandise, warehouses, and billboards to change prices or content at any time without rewriting.
VIII. Security and anti-counterfeit printing As the printing equipment and technology have been fully improved, the traditional four-color printed trademark, packaging and manual have no anti-counterfeiting effect, and they must be different with six-color and seven-color high-speed fax color printing. In addition, the use of laser holographic stick Standard or gilding, it has some effect, but the magic trail fades, and soon may have to find a more fine interference wave security pattern can be. The high cost of gravure printing also has certain anti-counterfeiting effect. Therefore, the color is thick and the fine carving lines are there. There is a deep layer of anti-counterfeit effect under high-tech. Although the embossing and watermarking techniques are old and effective methods, such as the perforation of stamps, which are punched by millions of yuan per mold, it is not easy to imitate. In short, if the cost does not increase too much and imitation people are not easy to imitate, the most important thing is that without tools, ordinary people can tell with their eyesight that it is the focus of anti-counterfeiting, but out of new technology methods, they will be imitated within a certain period of time. This is the anti-counterfeit focus to be updated from time to time.
IX. Changes in the printing market and changes in the printing industry from the original manufacturing industry to the value-added industries of information dissemination, packaging, and industrial applications. How to deal with the social, market, and value-added chain disruptions, the market is often frustrated, and profits are diminished. Change to nothing, if you stick to the original scope is bound to lose everything. Twenty years ago, the birth rate was less than half of that of the present. The textbook industry was greatly reduced due to children attending school, and the government adopted an open but tightly controlled price effect. The original lucrative market left only a handful of people struggling.
How to find niche-based production projects in the new market, such as design, processing, three-dimensional printing, and variants that cannot be done by others, still has room for development. UV-UV printing on plastic plates has been exported for a year. More than one million US dollars worth of business, similar to LCD-TFT color filter printing, direct lithographic printing of larger thickness corrugated paper, free printing ink interferometric image reproduction, etc., are rare and delicate in the market, so we must find and even develop New technologies are applied in the market. Because the niche market is constantly changing and updating, we must be able to overcome technical difficulties, do a good job of service, and master its own "core skills" to enhance and apply, and more importantly, introduce new equipment and technologies at a critical moment to the market. The first step is to create profitable sustainable development requirements.
With the great efforts of our talented and diligent R&D team, we not only could produce the PLLA/PCL polymers, but also the PLLA/PCL microspheres from 5μm to 30μm. Because of good biocompatibility and biodegradability, they can be used in various areas, such as for plastic surgery implants, dermal fillers and other high-end anti-aging cosmetic products.
Rimless Industry Co., Ltd. (RIMLESS) is devoted to the global brand operating and integrating, sale and after-sale services of biomedical materials, high-end medical devices, regenerative aesthetic products,cosmetics and beauty tools.
RIMLESS is the exclusive distributor, exporter and global brand licensor of REBORN. We take REBORN and RIMLESS as the core brands, biomedical materials and their applications in the medical field as the main business, and the high-end medical devices as the research and development direction.
We have exported over 50 countries and areas in the world and won a very good reputation and long-term partnership with our customers.
Medical Use Poly-l-lactic Acid Microspheres,Poly L-Lactide Microsphere,PLLA Microspheres Powder,Medical Grade Poly L-lactic Acid Microspheres
Rimless Industry Co.,Ltd. , https://www.rimlessmedbeauty.com