How to Apply BD Language for Complex Tables

The form comments provided in the software of Peking University Founder Edition are an option with many more powerful annotations. If you can correctly understand the absorption, you can arrange various complicated forms by selecting the appropriate ones and then adding other annotations. , Including a variety of line types, slashes in all directions and arbitrarily divided form items. The form of this annotation row is formed by a combination of multiple table rows. The table row can also embed any number of child tables within the allowable range of memory to generate various complicated table layouts. Although its note writing is complicated, the table row - sub-surface layer nested, but the most important is the wording of the table row, because the sub-table is a small table, can be equivalent to the simplest of the general table, its table body writing and table annotation In the same way, it reduces the complexity of any table. Both the slash annotation and the table annotation can be said to be independent annotations, and the annotation writing method is also simple. Therefore, as long as the notes on the table are written, the most important thing is to grasp the choice of parameters in each column, and it will be able to arrange all kinds of complicated table layouts.
For invoices, forms such as books, although the content is more, some layouts are complex, but overall the layout is more regular, and the form comments can handle such layouts well. Since the earliest such tickets were mainly hand-leaded, the distance between them was uneven and could not be calculated in whole words or whole millimeters. However, in order to prevent counterfeiting of such tickets, some customers demanded strictly according to the size of the manuscript provided. Typography, which brings certain difficulties for typesetting, modification and adjustment. When calculating the height of the table row and the width of each column in the table row comment, besides the word as the unit of calculation, three calculation units of millimeters, pounds, and lines are also provided, and as long as an appropriate calculation unit is selected, the typesetting can be quickly and accurately achieved. Claim.
Received pieces, should carefully observe the layout and layout requirements, whether the need for external steel knife line; with the title description of the form, the overall layout can be treated as a large table, if the local layout in the same large table It is difficult to arrange or cannot be ranked, can be generated by other annotations or other software and then transferred to the book software to achieve imposition (for example, after generating through interactive charts, inserting notes, etc.); Second, how should Think of a local layout with a title description as a table row or a table entry. A large table should be divided into several large table rows. There are several small child tables in the table row. Whether the child table is still nested There are subtables, how many similar table rows can be copied by the block copy; next, how many items in each table row are specifically analyzed, how to write comments is the easiest; next, how many rows are analyzed in each table Items, how to write comments on the most single. In this way, after analyzing all levels, we have a good idea and clear thinking. When actual layout is carried out according to this idea, we can reduce mistakes in operations and improve work efficiency. After clarifying the thinking, we must first measure the height of each table row and the width of each column. You can use pencils to mark the data on the manuscript. In this way, you will not lose sight of them, and you will interrupt the ideas by measuring the height and width of the table.
When the manuscript requires the outer steel knife line, the four peripheral steel knife lines are used as the edges of the entire table, and the middle content is treated as a sub-table. For a table with a title description or the like, the title description is treated as a table row with no edges, which is simpler and more precise than simply using the position control class annotation to adjust the position without using it as part of the table. The use of table-line annotations with centerline options, along with slashed annotations, can eliminate arbitrarily structured table frames. Due to the low version of the form note, the line model is only two lines, positive line, reverse line and wireless. When you encounter other line types, you can first select the wireless parameter in the column parameters, and then in the item content. With slashes to write, you can achieve the goal. For cards like savings cards, there are often cases where the year and month are added to the table frame. You can use the start note to adjust the position. Special attention should be paid to the fact that some of the more independent small tables, such as an independent table, cannot be adjusted using the start note, because for the table, the start note is the first line of the first line of the area, so it should be Think of it as a sub-table of the entire large table. This will make the comments quite complicated and require special care. The idea should be clear.
For the more stringent requirements, two adjacent table rows are in the same table entry, and the number of rows and columns in the upper and lower tables is different. The most common one is that the entries of the upper and lower table rows are not aligned. This is mainly due to the use of words. When the scale is in units of pounds or millimeters, because the column spacing cannot be calculated as an integer, there is a difference in accuracy when calculating the position occupied by the line. If the column width is calculated using the line unit, the upper and lower lines cannot be aligned. Case. Another situation is caused by improper connection between sub-tables and table rows. The main reason is that sub-tables are unreasonably divided. Sub-table partitioning methods should be reconsidered, and the correct selection of the midline model of the column parameters should be taken into consideration.
In actual entry, there are three states: one is in the dynamic keyboard, one is in the five-stroke font state, and the other is in the ASCII state. It is recommended to enter the comment control characters in the Wubi state or in the ASCII state, which is convenient and quick when calculating the column parameters in units of lines or millimeters. There is no need to frequently switch the keyboard. When entering comments on the screen, it is best to use a newline to separate each table row and child table, leaving a large row between the table rows. This is not only a clear step, a clear distinction, but also more intuitive, to adjust the changes The search provides convenience.
Because there are many different types of manuscripts in the same layout, it is necessary to exhaust all kinds of complicated and demanding forms, and we must constantly ponder in the work, accumulate experience, and after careful analysis, how to analyze The row can use the most simple and convenient annotation to discharge the best results on the premise to determine the table row, sub-table division, can not be simply divided by the barrier line.
In short, beautiful and neat forms can be discharged through smart and reasonable selection of various parameters, together with some other annotations. (●Zheng Feng Lei Fuzhou Second Printing Factory Technology Branch) ("Guangdong Printing")