How do you pay attention to the problem of waxing old elm furniture?

(1) Before waxing, check if the paint surface of the old elm furniture is damaged. For new beech furniture, clean the surface of the furniture with a soft cotton cloth before waxing. For stains that are difficult to clean after leaving for a long time. You can wipe with a rag and alcohol.

(2) When the furniture made of eucalyptus is waxed, spread it with a small piece of cotton cloth and apply a large amount of glazing wax. Then use a large dry cloth to wipe the wax evenly in a circular block. The amount of wax should be mastered, not too much or too little. If the wax is used too much, it will not only leave streaks and streaks, but also affect the gloss. After a long time, it will soften the paint layer and it will not be easily removed.

(3) It should be noted that in the choice of waxing, one should choose one to use and not to change frequently, so that it is easy to grasp its characteristics. The area where the paint is damaged should be treated before waxing. The surface is scratched and not deep and the traces of wood can be directly polished with glazing wax. For the white circle traces left on the paint layer of the hot tea cup, a small amount of vegetable oil can be rubbed by hand, sprinkled on the traces, and rubbed with a cloth. If the traces have not been removed, immerse a piece of cotton cloth in warm water, wring it out, apply a few drops of ammonia, and then polish it with glazing wax.

The old beech furniture retains the rugged natural texture of the wood itself, allowing people to touch the natural traces of the wood. The scars and insect eyes of the wood itself are unadorned, and the natural charm of the original ecology is vividly expressed.