Friends who like to raise flowers pay more attention to the appearance of flower pots. Flower pot making is a technical activity. Good gardeners not only raise flowers, but also make flower pots very delicate. For the production of flower pots, choose the right materials to create a good garden environment. Young people can cultivate their sentiments with flowers, and the elderly can raise boring time. Then everyone will follow the small series to see the relevant content of the flower pot production .
Cement pots cannot be made directly because of their characteristics, so a mold is needed. Here, a square cement basin with a length, width and height of 10 x 10 x 13 cm is used as an example to demonstrate how to DIY a mold and make a cement basin.
First, the following materials are required:
1. About 9mm thick pearl plate
2 feet
3. Cement (with sand blending)
4. No. 100 sandpaper
5. Pin
6. Styrofoam
7. Bizarre pen
8. Scotch tape
9. Utility knife
10. Spoon
11. Bucket
12. Long nose pliers
Second, the steps:
Step1 Draw the size of the inner and outer molds on the pearl plate with a ballpoint pen.
Step2 Cut and cut along the line with a utility knife.
Step3 The cut pearl plate is fixed with a styrofoam glue in a back shape.
Step4 Strengthen the fixing on each side and bottom with a pin.
Step5 After completing the inner and outer molds, seal the gap and the periphery with a transparent tape.
Step6 Cut a small piece of pearl plate to the center of the bottom of the outer mold as a space for the bottom hole.
Step7 Mix the cement mortar with a spoon (cement: water = 2:1). If the water is too little or the mixing is uneven, the cement pot will be brittle.
Step8 Fill the cement mortar to about half the height in the outer mold.
Step9 Place the inner mold in the center of the outer mold and press it to the bottom.
Step10 Scotch tape cross method to fix the inner and outer molds.
Step11 Let it stand in the cool and ventilated place for two days. Do not expose it to sunlight, so as to avoid cracking of the cement slurry.
Step12 Use a utility knife and needle-nosed pliers to carefully remove the inner mold.
Step13 Use the utility knife to cut the outer mold and take out the cement pot.
Step14 Use a needle-nosed pliers to poke the center of the bottom and poke the pearl plate to expose the bottom hole.
Step15 Polish the sharp or rough surface of the bowl with sandpaper.
Step16 Soak the pot in the water for maintenance. After 7 days, take it out and dry it. The curing can cause the cement pot to produce a hydration reaction in the water, in order to release the alkaline substance and strengthen the pot structure.
Third, the step method
1. The first step: use the old paper shell that you have collected and scrapped, and make the cement mold
2. The second step: then water the mortar directly, find the appropriate size of the physics as a hollow, or how to plant your flower pot.
3. The third step: waiting for drying
4. The fourth step; then sanding
5. Step 5: Spray paint according to your preference, in fact, you can also not spray, it is more rough
Fourth, matters needing attention
1. Straight mortar used
2. Material to water ratio is 1:4
3. I don't know where to get the materials, Jingdong is available for sale.
How about, I read the wonderful introduction to the pot making above. Have you learned a lot about the production of flower pots? I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
More related wonderful reading:
What are the cement embossed flower pots? Cement embossed flower pot production precautions
Advantages and disadvantages of cement pots
How to make natural stone flower pots make natural flowers in stone pots
Natural stone flower pot making process natural stone flower pot price
The Mesh Coin Purse is more convenient to carry, comfortable to feel, and easy to clean, so that the most things can be packed in the smallest space. Digital printing, silk-screen printing, and other printing methods and accessories combination for relevant design, is the combination of practicality and aesthetic culture.
Mesh Coin Purse,Vintage Mesh Coin Purse,Vintage Metal Mesh Coin Purse,Antique Mesh Coin Purse
Jilin Y.F. Import & Export Co.,Ltd , https://www.yfpencilcase.com