How to choose the wardrobe sliding door?

[ Chinese wardrobe net ] In addition to paying attention to the shape and price of the product, the most important thing for the wardrobe is to consider the quality of the wardrobe sliding door. This is an important part of the sliding door wardrobe can not be ignored. How to choose and determine the quality of the sliding door wardrobe?

The sliding door is not only the face of the wardrobe, but also an important factor affecting the beauty of the home and the service life of the wardrobe. So when we buy a wardrobe, how to quickly buy a good wardrobe sliding door? Here is a brief introduction to how to buy a wardrobe door.

First, the seal determines the environment inside the wardrobe

In order to ensure that the two doors are staggered and closed, all sliding door products will have a gap. The general external pulleys need a spacing of 15 mm. This interval affects the sealing of the sliding door, especially in places with large wind and sand. The inside of the closet is easy to accumulate dust. Although most products have tops, the gap between the tops used in different products and the gap size is still relatively large. Try to choose products with small spacing and tight tops. For example, the product has a door spacing of only 5 mm, and the high-density tops basically prevent the intrusion of dust and keep the wardrobe and clothes clean.

Second, the key to bearing, small pulleys can not be underestimated

The pulley is the smallest but most important hardware component of the sliding door (the overall wardrobe brand ). There are three kinds of pulleys on the market: plastic pulleys, metal pulleys and fiberglass pulleys. The plastic pulley is hard, but it is easy to be broken. It will become awkward and hard when used for a long time, and the push-pull feeling becomes very poor. The metal pulley is strong, but it is easy to generate noise when it comes into contact with the rail. The fiberglass pulley has the toughness, wear resistance, smooth sliding and durability, and is the best pulley material available today.

Third, the track is good or bad

The high-quality sliding door ( integrated wardrobe brand) hardware is mainly reflected in the design and manufacture of the pulley system and the track, and the perfect combination of the two, the track is crucial. The quality of the track depends on the fact that it must have a curvature that can be matched with the pulley. It should be reminded that the good track is excellent in the strength design and the smoothness of the contact surface with the pulley, not the thicker the track wall, the better. At present, the track of the sliding door has two types of cold rolled steel track and aluminum alloy track. Rails are not always good. It should be said that good aluminum rails are superior to rails in some respects, especially in terms of noise immunity. In addition, it is necessary to pay attention to whether the product has a stop block and an upper and lower rail positioning system, whether there is a glass anti-collision strip, whether the bearing type pulley is smooth and silent when pushed, whether a shock absorption system is placed in the bottom wheel, whether there is a door height adjusting device, etc. .

Fourth, look at the flatness of the door

The high quality cabinet door has strict requirements on material selection, process control and factory inspection. The surface of the finished cabinet door is flat and straight, and the shape is perfect after installation. Inferior cabinet doors have low requirements on materials, processes and inspections. The warpage of finished wooden doors is large. It is obvious that the doors and door frames cannot be aligned after installation.

200pcs Poker Chips

200PCS 11.5 G DICE CHIPS ALUMINUM CASE Poker Chips SETS

200Pcs Poker Chips,Metal Poker Chips,Poker Chip Casino,Poker Chips Casino Set

Hangzhou Wonderlandtoys Co., Ltd , https://www.wonderlandtoyscn.com