Customized wardrobe material how to choose custom wardrobe purchase considerations

[China wardrobe Network With the improvement of living standards, many owners in the choice of wardrobe, would choose custom closet, custom closet sheet choose how it? The following website will tell you how to customize the wardrobe sheet selection and custom wardrobe purchase considerations.

Custom wardrobe material selection method:

First, different grades, plates are also different

How to judge the plate of the custom closet? Generally, the cut surface of the sample is seen. From the cut surface, the blockboard is two or four layers of upper and lower boards (also thickened using four or more single boards) close to the solid wood core, the quality of the fine board. The core cut surface is flat and there is no gap; the MDF is pressed by fine fibers, the combination is relatively tight and the weight is relatively large; the particle board is a wooden granular structure, but the combination is not tight enough, the weight is light, and the quality is poor. There are small pores; the multi-layer board is made of a plurality of veneers, generally three or five layers. Huajie's cabinet board is the cabinet board made of the northeast 椴杨 板 core blockboard, which is durable and not easy to be deformed.

Second, look for environmentally friendly plates

Professional custom wardrobe manufacturers use environmentally friendly panels that meet national testing standards, while some manufacturers use inferior panels that have no test reports and pose a potential threat to human health. Therefore, to buy a custom closet should first look at whether the business has a plate inspection report and related test certificate from the national authority inspection department.

Third, the quality of the veneer look

Some wardrobes look good on the surface, however, with a light stroke, you can draw obvious scratches. These custom-made wardrobes are made of surface-coated vellum paper or ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional custom closet manufacturers generally use environmentally friendly tri-poly panel with thick thickness and high temperature and high pressure treatment, high surface strength, abrasion resistance and scratch resistance.

Fourth, the board edge seal to see work

Professional custom-made wardrobe manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them.

Some even cut corners and only cut one side of the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life. With the wardrobe's leading design concept, Zhihua, while pursuing the high-quality manufacturing process of the wardrobe, pays more attention to the personalized overall solution provided by the high-end family.

Customized wardrobe purchase notes:

First of all, you should pay attention to the board when purchasing a custom closet.

The board determines whether the custom closet is environmentally friendly. Because many clothes in the closet are worn close to the body, the plates used in the custom closet are very important. The standard of the used plates must be the same as the standard of the cabinets and floors. According to China's environmental protection standards, according to the concept of formaldehyde release limit, in the plates The formaldehyde limit level is divided into three levels, namely E2 ≤ 5.0 mg / L, E1 ≤ 1.5 mg / L, E0 ≤ 0.5 mg / L. In China, the plate can reach the E2 standard, that is, the E2, E1 and E0 plates can be called environmentally friendly plates, but due to the improvement of consumers' environmental awareness, E1 or even E0 plates are more common on the market. The minimum grade of the board used for custom wardrobes should be E1 grade.

Secondly, the choice of custom wardrobe should pay attention to the home improvement style.

The style of home decoration determines the type of furniture. According to different home decoration styles, custom wardrobes also need to adopt different styles. The style of furniture should be determined at the beginning of house decoration. Similarly, custom wardrobes are also the same, many people They all complain about the custom closet. When they are at home, they feel that they are not in harmony with the decoration style of the home. It is because the custom wardrobe and home decoration style are not uniform.

Then, buy custom wardrobes to pay attention to hardware accessories.

Many people pay less attention to the hardware of custom wardrobes. In fact, the service life and satisfaction of custom wardrobes are usually determined by hardware accessories. In the whole wardrobe frame, the included hardware includes: three-in-one connector, hinged hinge rail (such as cabinet door hinge), decorative handle, decorative lock (such as drawer lock), clothes rail, Pants racks, etc., good hardware can guarantee the service life of the wardrobe, and inferior hardware will make the door open, not flexible, push and hold, and bring troubles and inconvenience to consumers, which requires consumers. In the custom-made wardrobe of furniture brands, the security of the wardrobe hardware should also pay attention to anti-counterfeiting, so that you can buy a quality wardrobe.

Finally, pay attention to after-sales service when purchasing custom wardrobes.

For after-sales service, many consumers are inevitably headaches. The purpose of choosing custom wardrobes is to personalize and optimize the use of space, but no one can guarantee that a problem does not occur. Therefore, the after-sales service of custom wardrobe brand manufacturers is crucial. Before buying a custom closet, you need to understand the brand's strength and after-sales service reputation. It is best to choose a brand with strong brand strength and after-sales service to find a good "nanny" for your custom wardrobe.

Electric Patient Lift

The electric patient lift realizes the safe transfer of paralyzed or injured patients or the elderly between beds, wheelchairs, seats, and toilets, which greatly reduces the work intensity of nursing staff, improves nursing efficiency, and reduces nursing risks. It can solve the movement, weighing and positioning control of the DPS patient's body position for the elderly, the disabled, the paralyzed patients, and the bedridden patients.


Features of medical Transfer Patient Lift
The caster legs can be adjusted arbitrarily within the range of 0°-38°, which is suitable for the angular needs of various wheelchairs, seats, toilets and hospital beds.
The height between the pillar and the lifting rod of the electric lift can be adjusted as needed (adjustment distance 0mm-50mm-100mm), and it can be lifted from the ground to a suitable position.
The electric lift has a safety emergency stop device.
During the lifting process, the patient can rotate 360° arbitrarily in order to obtain the best posture during transfer.
The push handle of the electric lift conforms to the principle of dynamics, which is convenient for pushing forward and backward or moving and rotating sideways.
The rear wheel is equipped with a brake device to prevent the lift from sliding when the patient is lifted, causing unreasonable injury to the nursing staff or the patient.

Electric Patient Lift,Patient Lift Hoist,Electric Mobile Patient Lift,Electric Sit To Stand Lift

Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalequipment.com