[ Chinese wardrobe net ] 9 points let you know the overall wardrobe material
1. Board material: The surface of the board is made of melamine finish, no need for paint, fine surface, smooth structure, hard texture, anti-mite flame retardant, known as “non-defective sheet†in foreign countries. The middle part of the substrate is medium density board, the density can not be lower than 0.80g/cm3, otherwise the bearing capacity and flatness will be affected; the water content can not be lower than 6.5%, but it should not be too high, otherwise it cannot adjust itself according to the change of climate; Surface technology, by hand touch to distinguish whether it is embossed surface or flat, the relief surface is the best; formaldehyde emission 1.1mg / L, to achieve European E1 standard, and test reports, alert to particle board, dyed moisture-proof board. In addition, good plates have anti-ant, anti-mildew and other functions.
2. Anti-counterfeiting of the board: There are brand logos on both sides of the embossed board and the edge-sealing position.
3. Smell the smell, soak the water test (too fast and not to be lifted).
4. Edge sealing: Whether it is smooth, delicate, and strong adhesion (pseudo-deterioration process carefully cracking).
5. The table should be like one: look at the material in the side plate hole. Of course, be careful of the material inside the cabinet side panel and the solid board and the laminate (four sides) without punching.
6. Standard specification plate: There are standards, processes and precision to ensure.
7. Aluminum alloy sliding door frame material: see the cross section is bright and smooth without burr, the minimum wall thickness is required to reach 1.1mm;
8. Whether the key hardware accessories are branded with their own brand anti-counterfeiting labels, and the weight (such as drawer guides).
9. Push and pull the sound to judge the quality of the pulley, but not to say that the sound is as small as possible (may be engineering plastic or nylon); whether the upper rail guide wheel has an adjustment function.
In short, carefully understand the sample to prevent consumption traps.
The advantage of Foam coated furniture:
1. Colourful.
Using best and hignest density high quality water-based raw material, which are safe for children, environmentally friendly and colorful.
It can realize all the colors of PANTONE color cards for designers and customers to choose freely.
2.Affinity, Soft Touch
The overall use of 35~65kg/m2 high density sponge, Never deform and collapse, environmental protection, breathable, soft and flexible. When the human body sits down, the sofa can strongly support the body's force. It feels the maximum comfort of the shoulder, waist and back, and is ergonomic.
3.Seamless connection
No fear of sunshine, wind and rain The sofa is made of PUAPLUS system
protective layer. PUAPLUS system protective layer has unique flexibility and weather resistance. It is easy to clean and soft in daily life. It can be used indoors and outdoors.
4.Sponge density rating: 35~65KG/m3 ILD rating: 65
Elongation: 518%
Load-bearing test up to 350lbs Product shape can be maintained for
8-10 years
5.Color layer with UV suppression Can be used indoors/outdoors
(outdoors with wooden or floor mats) Available in 16 color options, customizable colors (have customized cost)
6.Maintenance advice: wipe with water,
Stubborn stains can use Jingjie multi-functional detergent
Polyurethane foam furniture,Foam coated sofa,Children sofa,Custom made outdoor furniture
Golden Eagle Outdoor Furniture Co., LTD. , https://www.gepatio.com