[ Chinese wardrobe network ] A good wardrobe can follow the consumer for a long time, and the quality of the wardrobe will cause trouble to the consumer's life. Most of the quality of the wardrobe is judged according to the material. The material of the wardrobe is also varied. So is the wardrobe material solid wood or composite sheet good?
The choice of furniture depends on your economic coverage. Solid wood is more difficult to manage, the price is higher now the lowest solid wood on the market is almost 150/160 more than one level (after folding), composite wear resistance is stronger, cheaper. The minimum of compounding is more than 70 and more than one level (after folding), the discount of wooden floor will not be too low, and a 30% discount is a good relationship. There are also two integrated, you can choose multi-layer solid wood.
From the pollution of the indoor environment, solid wood is good. After all, it is produced by processing logs. From the protection of the environment, the use of composite furniture produced by regular manufacturers is good.
Said custom wardrobe, can be subdivided into many kinds, one is solid wood custom cabinets and cabinet doors are solid wood, many advantages, the disadvantage is the cost of the cabinet, the projected area cost close to 3000 square. Another disadvantage is that due to the solid wood, the cracking problem should be considered. Especially in the heating season in the north, cracking is particularly noticeable. If it is custom made of solid wood, the selection of materials has become very important. Now it has evolved into a melamine or particle board for cabinets. It is also useful for multi-layer composite panels. The cabinet doors are made of solid wood.
Another is to use MDF or particle board, the way to stick veneer on the outside, the relative cost is much lower.
The so-called custom wardrobes are generally processed by means of particle board or MDF, which is attached to wood grain paper. Because the cost is cheap.
Pure solid wood doors are soundproof, but expensive, but if you use oak, there will be no thermal expansion and contraction; composite solid wood doors will not be inflated and contracted, and will not be deformed. Generally, the decoration of the workers is done on the spot. The solid wood composite door made of double-layer wood board and decorative panel is used. If it is renovated and rented out, it is recommended to buy a ready-made molded door, which is cheaper.
Try not to make furniture now. Buying real solid wood furniture is the most cost-effective, durable, timeless, used to good solid wood furniture, you will have feelings for it, even if you move it is difficult to give up. I have used a set of solid wood furniture for a few years and it is still very new. This time I installed a new house without doing the same furniture - in addition to entering a large shoe cabinet, it is only a cabinet. Solid wood furniture seems to be a large one-time investment, but the comfort, safety, durability and sense of use are unmatched by the temporary creation of the panel.
Stainless Steel Work Table,Steel Work Bench,Stainless Steel Display Table,Steel Work Table
Jiangmen T2grand Stainless Steel Kitchenware Factory , https://www.yapamit.com